Combines enhanced comfort with pressure area care.
Repose Contur is a pressure redistribution cushion overlay for riser recliner chairs utilising the Repose tried and trusted inflatable air cell and ‘smart valve’ technologies.
Offering pressure area care to the seat, back and leg sections, it secures to the chair easily and safely with straps and thus it can either be fitted to new chairs or be a straightforward retro-fit for users who already have a chair and require a specialist support surface.
To learn more about Repose Contur please contact us using the button below.
Features
- Specially formulated extra resistant to chemical disinfectants, especially chlorine.
- Adjustable straps for a secure fit on a range of chair sizes.
- Repose tried and trusted single air cell and smart valve technologies.
- The zip has an integral cover flap for added protection against fluid ingress.
- Provides pressure redistribution across the whole surface for the at-risk areas of the body – sacrum, buttocks, scapulae, vertebrae, shoulders, back of head.
- Sophisticated technology in a simple to use recliner chair overlay cushion.
- Secure strap system allows for straightforward retro-fit or new chair use.
- The cover can be wiped down or machine washed at 60ºC.
- Cost effective method to provide pressure area care to a recliner chair.
Specification
Repose Contur
- Contents: 1 x Repose Contur Inflatable Inner Section, 1 x Contur Cover & 1 x Small Pump
- Inflated Dimensions: L 1715mm x W 490mm x H 50mm
- Inflated Back Section Dimensions: L 745mm x W 490mm x H50mm
- Inflated Seat Section Dimensions: L 425mm x W 490mm x H50mm
- Inflated Leg Section Dimensions: L 480mm x W 490mm x H50mm
- Order Code: 6310001
Repose Contur without Cover
- Contents: 1 x Repose Contur Inflatable Section & 1 x Pump
- Inflated Dimensions: L 1715mm x W 550mm x H 50mm
- Inflated Back Section Dimensions: L 745mm x W 550mm x H50mm
- Inflated Seat Section Dimensions: L 425mm x W 550mm x H50mm
- Inflated Leg Section Dimensions: L 480mm x W 550mm x H50mm
- Order Code: 6330011
- Max Patient Weight 139kg
- Inflation, deflation and repacking instructions: Please see download tab for instructions.
- Cleaning instructions: Please see download tab for cleaning guidance.
- Repose is supplied with a 3 year warranty as standard.
Indications for use
Repose products provide effective pressure redistribution for all people at risk of developing pressure ulcers, including those assessed as very high risk. Repose is also appropriate for users with pressure related tissue damage – clinical supervision is advised where the damage is severe.
Limitations for use
Repose is not suitable for the following:
- Persons weighing in excess of 139kg
- Persons with unstable spinal fractures
- Where body shape is such that the person cannot be fully supported by the Repose mattress overlay or cushion
- Repose is suitable for use with bed and trolley side rails subject to the bed or trolley manufacturer’s instructions and appropriate risk assessment
Precautions
If deterioration in skin condition is noted, clinical advice should be sought and, if so advised, use of the product discontinued. Avoid direct contact with heat and sharp objects. When deflated, keep away from babies and small children. Keep away from pets.
Clinical Information
- A review of evidence for use of the Repose® product range
Wounds UK Journal, November 2015, Volume 11, Issue 4
SAMANTHA HOLLOWAY, Senior Lecturer, Cardiff University School of Medicine, Cardiff.
FAQs
Is there a weight limit for patients using Repose?
Repose can be used for patients up to 139 kg. There is no lower patient weight limit. Patients at the higher extremes of the weight range should be monitored regularly.
Do you have to manually set the pressure on Repose?
No, ‘smart valve’ technology in the pump automatically ensures Repose inflates to the optimal pressure. This pressure has been demonstrated over time (and supported by clinical trials) to be the optimal balance between comfort and efficacy for pressure ulcer prevention and treatment.
How should the products be cleaned?
Cleaning recommendations for Repose are similar to those for standard PU covered foam mattresses. Clean with soap and water and, if necessary, with a chlorine-based disinfectant (not phenol-based). The product should be dry before repackaging into the tube. Cleaning instructions are supplied with the product. Repose is reusable.
Can the product be repaired if it is punctured?
Puncture is an infrequent occurrence and is usually caused by pets. We have no evidence to support the use of Repose after repair and we therefore recommend that if the product is punctured, it should be replaced.
What is the fire resistance of the product?
Repose has been tested to conform with BS: 7175 Crib Test 5, (Methods of test for the ignitability of bedcovers and pillows by smouldering and flaming ignition sources).
Can Repose be inflated with the patient in place?
No, the ‘smart valve’ technology is designed to set pressures before the patient is in place. It takes less than a minute to inflate Repose prior to use.
Should the mattress overlay be covered by a sheet?
It is not necessary, however most patients find it comfortable and carers find it convenient to use a cotton sheet. If a sheet is used, it should be loosly fitted to ensure that “hammocking” does not occur.
What happens if the person requires CPR?
Repose is a low profile mattress overlay which contains no exposed metal or electrical elements and can be used safely during CPR.
How should the product be disposed of?
Repose is a CE marked medical device. At the end of its useful life, the product should be treated as healthcare waste and disposed of according to local healthcare waste guidelines. It may be incinerated with other healthcare waste.
Can the mattress overlay be used with electric under or over blankets?
Repose has not been tested for use with electric blankets. Frontier do not endorse or provide guidance on the use of Repose in association with electric blankets.
Does a patient on Repose still need to be turned?
Pressure ulcers result from a combination of factors including pressure, shear, friction, and maceration. In common with all pressure redistributing mattresses carers should follow standard protocols for turning the patient whilst on a Repose Mattress Overlay.
Is Repose latex – free?
Yes. Repose is latex – free and non – allergenic.
How can you place an order?
Should you wish to place an order, we require payment proforma and accept both cheque and debit cards. You may either telephone Customer Services on 01495 235 800 to place your order and pay via card, or post your order together with cheque to the below address.
Frontier Therapeutics Limited, Innova One Tredegar Business Park, Tredegar, Blaenau Gwent NP22 3EL
When will you receive your order?
Upon receipt of payment, delivery is within 5-7 working days.
If you require any further information, please do not hesitate to contact Customer Services on 0044 330 460 6030.
VAT Exemption
VAT refunds for disabled users
If you are chronically sick or disabled you may be eligible to claim back the VAT on your Repose order.
Quick Guide
Step 1: Place and complete your Repose order.
Step 2: Download and complete the Eligibility Declaration Form.
Step 3: Send the completed form to Frontier Medical Group.
Step 4: If eligible we will refund the VAT to the card you used to process your Repose order.
To apply for VAT relief please complete your purchase and download the Eligibility Declaration Form. Please send the completed form to Frontier Medical Group, we will then process your application. If you are eligible for VAT relief we will refund the VAT to the card you used to process your order payment.
For further details please see our terms and conditions or visit the HMRC website.
